Wednesday, November 6, 2019

The variety of hoaxes essay

The variety of hoaxes essay The variety of hoaxes essay The variety of hoaxes essayThe museum of Hoax offers a variety of hoaxes which stirred the public in the past. At this point, the hoaxes depicting images of the Loch Ness monster, which are mainly unclear black and white photos depicting what was presumably treated as the Loch Ness monster. However, neither photo has been approved by scientists that means that they cannot be viewed as the evidence of the existence of the monster. At the same time, these hoaxes show the full extent to which the public was concerned with the existence of the Loch Ness monster. Basically, hoaxes are not credible for any critical mind because there are no clear photos made, while the only one made by Anthony Shiels is not credible because of the reputation of the photographer. At the same time, hoaxes are not credible because, in scientific terms, they cannot be treated as the evidence reliable enough to prove the existence of the Loch Ness Monster. In fact, there should be more evidence of the existence of the monster aside of the photos made in different time throughout the 20th century. In addition, the Loch Ness monster has become the tourist attraction and later photos are apparently fake or staged. In fact, when hoaxes are studied in details, it becomes evident that there are no clear indications that they depict the monster. For instance, if one looks at those photos without captions or without having any background information about them, one would never guess that it is supposed to be a monster depicted on those photos. This is why hoaxes of the past attempting to persuade the public that the Loch Ness monster does exist are not credible but still they stirred the public a lot and made the Loch Ness one of the main attractions of Scotland.

Monday, November 4, 2019

Berlioz Bicentennial Essay Example | Topics and Well Written Essays - 1000 words - 1

Berlioz Bicentennial - Essay Example With Currie sounding each drum, mallet, or "metal" to an ever-repeating rhythmic figure, various orchestral soloists and ensemble groups simultaneously define the melody or motif. Torke's expressed goal is to use these devices to get the listener "grooved into a rapturous state". Except for parts of the marimba movement, I was chiseled into an unrelentingly bored state. In this work, Torke commits an unpardonable sin: most of his forces go unheard. Specifically, the full string complement, the full wind complement, and the harp are seen busily sawing, blowing, and plucking away with only occasional audible evidence of their presence. The listener hears only the trumpets and trombones vying for attention with Currie's fearsome forward phalanx. The audience did give hearty applause at Rapture's conclusion and reportedly bought considerable numbers of its Naxos CD recording during intermission. In my view, however, they were sustaining a collective placebo effect from Torke's pre-performance address to them regarding the "sexual rapture" and related concepts. Like the 12-tone music of nearly a century ago, Rapture needs to be studied not merely heard to be appreciated.

Saturday, November 2, 2019

U10a1 Life in the Universe Review Assignment Coursework

U10a1 Life in the Universe Review Assignment - Coursework Example Evolution is a natural phenomenon. Natural selection is the reason why evolution happens. In its most basic form, evolution is genetic change within a population - specifically changes in the allelic frequencies of said population. Genetic drift, natural selection, mutation, and migration these are the basic mechanisms of evolution. Evolutionary thought can be traced back to classic Greece, but it is most commonly associated with Charles Darwin. Darwin only described one of the mechanisms that now are known to guide evolution: Natural Selection. He also put forward his idea that all the species have originated from a common ancestor and changed over time to the present situation. Natural Selection is the process by which favorable heritable traits become more common in successive generations of a population and unfavorable heritable traits become less common due to differential reproduction. That is: given a certain population, those individuals who are more fit to the selective pres sure(s) by their habitat will leave more descendants than those less fit. This means that for Natural Selection to act, a population must be composed by individuals that differ in their traits. Evolution is the explanation for the development, adaptation and diversity of life, as well as the morphological similarities between different kinds of life. Darwin's Theory of Evolution: Darwin's Theory of Evolution is the widely held notion that all life is related and has descended from a common ancestor: the birds and the bananas, the fishes and the flowers -- all related. Darwin's general theory presumes the development of life from non-life and stresses a purely naturalistic "descent with modification". That is, complex creatures evolve from more simplistic ancestors naturally over time. In a nutshell, as random genetic mutations occur within an organism's genetic code, the beneficial mutations are preserved because they aid survival -- a process known as "natural selection." These ben eficial mutations are passed on to the next generation. Over time, beneficial mutations accumulate and the result is an entirely different organism. Darwin's Theory of Evolution - Natural Selection: Natural selection acts to preserve and accumulate minor advantageous genetic mutations. Suppose a member of a species developed a functional advantage, its offspring would inherit that advantage and pass it on to their offspring. The inferior members of the same species would gradually die out, leaving only the superior members of the species. Natural selection is the preservation of a functional advantage that enables a species to compete better in the wild. Natural selection is the naturalistic equivalent to domestic breeding. Over the centuries, human breeders have produced dramatic changes in domestic animal populations by selecting individuals to breed. Breeders eliminate undesirable traits gradually over time. Similarly, natural selection eliminates inferior species gradually over time. With the proper tools, we can sample the DNA of a population to see how the abundance of a particular gene changes as the environment changes. For example, in the mangled example of antibiotic resistance in bacteria, one type of antibiotic targets the prokaryotic ribosomes. A drug that binds bacterial ribosomes blocks the ability of the bacteria to synthesize proteins. One way that bacteria can evade this type of drug is to mutate the target site. If in the

Thursday, October 31, 2019

Analysis of the Pepsis and Bacardi Limons Advertisement Essay

Analysis of the Pepsis and Bacardi Limons Advertisement - Essay Example This "Analysis of the Pepsi’s and Bacardi Limon’s Advertisement" essay outlines differences between two drinks' ads. The first advertisement carefully projects the image of Pepsi as a fun drink that all members and all age groups enjoy. The men hold Pepsi bottles, as also the girls. The pepsi bottles in the picnic box further heighten the impression that it’s a drink meant for outings and is even better than beer. Another significant detail is the Pepsi icon in the shape of a ball, where the text states: â€Å"it’s the cola†, further reinforced by the football nearby on the picnic table, which further heightens the impression that this is a drink associated with fun and games. The heart shaped carving on the tree with â€Å"Pepsi and BBQ† engraved within it is a useful little detail that implies Pepsi is made for such outdoor occasions. The second advertisement is set in a bar/disco/party setting, which conveys an impression that the drink be longs in a more adult, sensual setting. The words in the advertisement convey the mood: â€Å"Mischievous, mixable, magical†. This is substantiated by the image of the sexy woman reflected in the glass of the man who holds it, implying that it’s the drink that has brought her into the palm of his hand – a magical experience. The use of mirrors, the shiny clean bar, the sparkling crystal bottles and glasses, all contribute to the impression of a magical kind of dating environment, where the drink appears to be the prop that aids the man in capturing the woman he desires.

Tuesday, October 29, 2019

19th Century American Imperialism & 20th Century War Essay Example for Free

19th Century American Imperialism 20th Century War Essay Captain Alfred Thayer Mahan couldn’t have said it any better, â€Å"No nation had ever become great without control of foreign markets and access to the natural resources of foreign countries† (Kinzer 33). Throughout the years, America has had an astonishing obsession with the idea of global imperialism. One can’t help but ask the following question: what sparked this sudden obsession with global imperialism? Even though there are many different factors that helped spark this sudden movement, the biggest single factor was the industrialization of the world’s major industrialist societies, such as England, United States, Japan, and Germany. The sudden explosion of industrialization sparked a huge consumption of the earth’s natural resources, and initiated the need for expansion. Throughout the late 19th century up until today, America has approached global imperialism in a number of different ways. Methods such as deception, intimidation, fear, and violence have all been used throughout the American conquest in order to expand this imperialistic society. America had to start expanding and had to take over weaker countries. See more: Homelessness as a social problem Essay Americans had to look to faraway countries, weak countries, countries that had large markets and rich resources but had not yet fallen under the sway of any great power† (Kinzer 34). This paper will primarily focus on the reasoning provided by Kinzer’s book Overthrow. America has become the imperialistic society it is today because of the rapid 19th century industrialization and the constant American hunger for natural resources, territory, and global domination. â€Å"Whether they will or no, Americans must now begin to look outward. The growing production of the country demands it† (Kinzer 33). During the late 19th century, America enjoyed a successful conquest of Hawaii, Cuba, Philippines, and Nicaragua. Hawaii, which has always embraced a history of tradition and culture, was faced with the issue of modernization. Throughout the years, Hawaii had slowly started to fall under white control. Hawaii has always been a huge producer of sugar, with one problem. The major market for sugar was in the United States, but the Hawaiians could not export as much as they would like because of the high tariffs imposed on imported sugar in the States. When the reciprocity treaty as signed in the summer of 1876, Americans started installing military and commercial bases in Hawaii. The renewed treaty however was what really displayed that Hawaii was falling under white influence. The renewed treaty gave United States control of Pearl Harbor, an extremely fine natural port. On January 14th 1893, Queen Liliuokalani made a disturbing announcement to her cabinet. She proclaimed a new constitution which stated only Hawaiian citizens had the right to vote. This meant that the Hawaiian population of Americans would no longer be able to vote. This move gave Lorrin Thurston and John Colburn the reason they needed to initiate the overthrow of the Hawaiian monarchy, which would mark America’s first overthrow of a foreign government. The alarmed Thurston quickly wrote a letter to John L. Stevens, requesting military assistance for the overthrow of the queen’s regime. Soon after, on July 4th 1894, the Republic of Hawaii was proclaimed. During the Spanish colonization of Cuba in 1897, William McKinley was sworn in as president of the United States. McKinley did not like the idea of the Spanish in Cuba. However when talking about McKinley, Kinzer states â€Å"William McKinley believed that a self-governed Cuba would pose an extreme threat to the United States, for they might not do Washington’s bidding† (Kinzer 35). After all, the revolutionary leaders in Cuba were already talking about the social reforms and land redistribution they wanted to initiate. This greatly alarmed many American businessmen, for over $50 million was invested primarily in Cuba’s agriculture. McKinley had finally had enough and had decided it was time to use military force to end the Spanish regime in Cuba. On April 25th 1898, the Spanish-American War had officially begun. After the Spanish surrender, America started to kill Cuba’s dream of independence. In the 1898 Treaty of Paris, Spain gave up all rights to Cuba, surrendered Puerto Rico and Guam, and sold Philippines for $20 million to the United States. The Platt Amendment gave the US some economic and military control of Cuba. McKinley initially only wanted to build a naval base at Manila, Philippines. Later however, he decided he would embark on a journey of Christianizing the country. This was unnecessary however, for most Filipinos were already Catholic. On June 2nd 1899, the official Philippine-American War started. The United States would win the war, and dissolute the First Philippine Republic. At this point, the United States had obtained, by force, full sovereignty over the Philippines. With Cuba, Hawaii, Philippines, Guam, and Puerto Rico under its belt, America now had access to a wide array of natural resources and an assortment of markets. However, the conquest would not end there. In order for one to understand the takeover of Nicaragua, one must understand Central America in the late 19th century. The late 19th century proved to be a strong idealistic era for Central America. Ideas of both social and political reforms were sweeping many Central nations, ideas inspired by European philosophers. These ideas were absolutely despised by the American government, for these ideas called for change. These ideas were admired by Central Americans because they all desired change. Jose Santos Zelaya became president of Nicaragua in 1893. He adopted many revolutionary changes, such as importing the automobile and legalizing civil marriage. He also had a very strong emphasis on building and expanding the country’s infrastructure. At first Zelaya and America were on good terms, for there have been talks of building a canal through Nicaragua. Later however, Panama was chosen as the building site, temporarily ending American interest in Nicaragua. As historian John Ellis wrote â€Å"To the State Department, Nicaragua was no longer a country that needed to be coddled or cared for in preparation for future usefulness, rather, it was not a country that needed to be watched carefully and kept in line† (Kinzer 60). A very strong nationalist, Zelaya was giving some of the American business based in his country trouble, which didn’t appeal to the United States secretary of state Philander Knox. What angered Knox even more was that Zelaya went to European banks to borrow money for his railroad project, not American banks. This showed the Taft administration that Nicaragua was trying not to depend on the States as much as they used to, which of course cause congressional panic. After much trouble from Knox, Zelaya finally resigned in 1909. After the brief command of Jose Madriz, Juan Jose Estrada took over the country, and the new conservative government was much admired and supported by the United States. Estrada’s coming to power marks the conquest of Nicaragua, because of America’s strong influence on Estrada’s regime. As demonstrated, the United States has always obtained a hostile approach regarding takeovers and conquest. The first overthrow took place in Hawaii where the queen was relieved of her position. Cuba was later obtained from Spain with the help of brute force and intimidation. Philippines and Puerto Rico were also obtained in the same fashion. Nicaragua’s government fell victim to an American sponsored coup, and their government was taken over by the Americans. It seems like there has always been a recurring pattern throughout American history. If you try to stand up to the US government, you will go down. If you operate your country in a way that doesn’t appeal to the US government, you’re going down. If you just happen to be doing good for your country, there’s still a good chance you’re still going down. America has always been that big bully that beats on the little kids at school, because they are just too weak to defend themselves. America throughout the 19th century was a product of a heavily industrialized society, a society that must rely on domination of other markets and other countries’ resources in order to keep expanding and thriving.

Saturday, October 26, 2019

Introduction To Dc Dc Converter Engineering Essay

Introduction To Dc Dc Converter Engineering Essay ABSTRACT A bidirectional dc-dc converter is used for dc-dc power conversion applications. The power converter includes two full bridge converters This Bidirectional dc-dc converter is best for electrical vehicle applications. A bidirectional, isolated topology is proposed in consideration of the differing fuel cell characteristics from traditional chemical-power battery and safety requirements. The topology proposed in the paper has advantages of simple circuit with soft switching implementation without additional devices, high efficiency and simple control. INTRODUCTION TO DC-DC CONVERTER: DC-DC converters are devices which change one level of direct current/ voltage to another (either higher or lower) level. They are primarily of use in battery-powered appliances and machines which possess numerous sub circuits, each requiring different levels of voltages. A DC-DC converter enables such equipment to be powered by batteries of a single level of voltage, preventing the need to use numerous batteries with varying voltages to power each individual component.   1.1. BUCK-BOOST CONVERTER Fig. 1: schematic for buck-boost converter With continuous conduction for the Buck-Boost converter Vx =Vin when the transistor is ON. When the transistor is OFF the inductor in trying to maintain the current in the same direction reverses its polarity as a result of which the diode is forward biased and Vx =Vo. For zero net current change over a period the average voltage across the inductor is zero. Fig. 9: Waveforms for buck-boost converter Vin ton + Vo toff = 0 which gives the voltage ratio and the corresponding current Since the duty ratio D is between 0 and 1 the output voltage can vary between lower or higher than the input voltage in magnitude. The negative sign indicates a reversal of sense of the output voltage.   CONVERTER COMPARISON The voltage ratios achievable by the DC-DC converters is summarised in Fig. 10.We can notice that only the buck converter shows a linear relationship between the control (duty ratio) and output voltage. The buck-boost can reduce or increase the voltage ratio with unit gain for a duty ratio of 50%. Fig. 10: Comparison of Voltage ratio 1.3 BI-DIRECTIONAL DC-TO-DC CONVERTER A DC-DC converter which can be operated alternately as a step-up converter in a first direction of energy flow and as a step-down converter in a second direction of energy flow is disclosed. Potential isolation between the low-voltage side and the high-voltage side of the converter is achieved by a magnetic compound unit, which has not only a transformer function but also an energy storage function. The converter operates as a push-pull converter in both directions of energy flow. The DC-DC converter can be used for example in motor vehicles with an electric drive fed by fuel cells. A bi-directional converter for converting voltage bi-directionally between a high voltage bus and a low voltage bus, comprising a switching converter connected across the high voltage bus, the switching converter comprising first and second switching modules connected in series across the high voltage bus, a switched node disposed between the switching modules being coupled to an inductor, the inductor connected to a first capacitor, the connection between the inductor and the first capacitor comprising a mid-voltage bus, the first and second switching modules being controllable so that the switching converter can be operated as a buck converter or a boost converter depending upon the direction of conversion from the high voltage bus to the low voltage bus or vice versa; the mid-voltage bus being coupled to a first full bridge switching circuit comprising two pairs of series connected switches with switched nodes between each of the pairs of switches being connected across a first wi nding of a transformer having a preset turns ratio; and a second full bridge switching circuit comprising two pairs of series connected switches with switched nodes between each of the pairs of switches being connected across a second winding of the transformer, the second full bridge switching circuit being coupled to a second capacitor comprising a low voltage node. 1.3.3 WORKING OF DC-DC Converters In its simplest form, a DC-DC converter simply uses resistors as needed to break up the flow of incoming energy this is called linear conversion. However, linear conversion is a wasteful process which unnecessarily dissipates energy and can lead to overheating. A more complex, but more efficient, manner of DC-DC conversion is switched-mode conversion, which operates by storing power, switching off the flow of current, and restoring it as needed to provide a steadily modulated flow of electricity corresponding to the circuits requirements. This is far less wasteful than linear conversion, saving up to 95% of otherwise wasted energy. 1.3.2 BIDIRECTIONAL DC-DC CONVERTERS TOPOLOGIES There are many circuit topologies for bidirectional dc-dc converter. Some of them are Non isolated (Without transformer): Full bridge bidirectional dc-dc converter (shown in fig) Half bridge bidirectional dc-dc converter II. Isolated (with transformer): Full bridge bidirectional dc-dc converter ( shown in fig) Half bridge bidirectional dc-dc converter 1.3 NON-ISOLATED BIDIRECTIONAL DC-DC CONVERTER: Fig2: Full bridge bidirectional dc-dc converter Fig 17 shows a basic circuit diagram of a full bridge bidirectional DC-DC converter. It has interleaved operation for both boost and buck modes It has smaller passive components It has less battery ripple current 1.3.2.2 ISOLATED BIDIRECTIONAL DC-DC CONVERTER (PROPOSED CONVERTER): Fig18: lv-side current source and hv-side voltage source Fig 18 shows the circuit diagram of an Isolated DC-DC converter. This converter has the following features Simple voltage clamp circuit implementation Simple transformer winding structure and low turns ratio High choke ripple frequency (2fs) Start up problem will be present in this circuit 1.4 SEMICONDUCTOR SWITCHING: Semi conductor switching are of two types. They are 1. Hard Switching 2. Soft Switching 1.4.2 SOFT SWITCHING More recently, new power conversion topologies have been developed which dramatically reduce the power dissipated by With soft switching techniques, reduction in wasted power will often improve the efficiency of a unit by more than 2%. While this does not sound significant, it can account for a saving of more than 20 W in a 1000 W power supply. This 20 W is power that would have been dissipated by the main power transistors, the most critical and most heavily stressed semi-conductors in any switch mode power supply. Reducing the power here lowers their junction temperature, giving increased thermal operating margins and, hence, a longer life for the power supply. Not only does a soft switching power supply generate significantly less electrical noise, it achieves greater efficiency, longer mean time between failures (MTBF), and higher immunity to the effects of other equipment operating nearby. It is desirable for power converters to have high efficiencies and high power densities. Packaging and cost limitations require that the converter have a small physical size and weight. Power density and electrical performance are dependent on the switching frequency as it determines the values of the reactive components in the converter. Thus, high frequency operation of the converter is highly desired. However, operation at high frequency results in higher switching losses and higher switching stresses caused by the circuit parasitics (stray inductance, junction capacitance). The circuit topology of the proposed bidirectional isolated converter is shown in Fig. According to the power  ¬Ã¢â‚¬Å¡ow directions, there are two operation modes for the proposed converter. When power  ¬Ã¢â‚¬Å¡ows from the low-voltage side (LVS) to the high-voltage side (HVS), the circuit operates in boost mode to draw energy from the battery. In the other power  ¬Ã¢â‚¬Å¡ow direction, the circuit operates in buck mode to recharge the battery from the high-voltage dc bus. Based on the symbols and signal polarities introduced in Fig. 2, the theoretical waveforms of the two operation modes are shown in Fig. (a) and (b), respectively. Fig42: Theoretical waveform under (a) boost and (b) buck operation Boost Mode (Discharging Mode) Operation When the dc bus voltage in the HVS is not at the desired high level, such as during a cold start, the power drawn from the low-voltage battery flows into the high-voltage dc bus. During this mode, the proposed converter is operated as a current-fed circuit to boost the HVS bus voltage. The LVS switches Q1, Q4 and Q2, Q3 operate at asymmetrical duty ratios and 1- which require a short overlapping conduction interval. Referring to the equivalent circuits for the boost mode operation in Fig. 43, the detailed operating principle can be explained as follows. Although the LVS switches subject to higher voltage stress, this is an advantage because the battery voltage is low. Because the overlapping interval for the LVS switches Q1, Q4 and Q2, Q3 is very short, the LVS transformer current flows through only one LVS switch at most time. Thus, the conduction losses for Q1, Q4 and Q2, Q4 can be greatly reduced to improve the conversion efficiency. Moreover, the LVS circuit produces a relatively ripple free battery current that is desirable for the low voltage battery. The voltage transfer ratio Mboost for the boost mode operation for the proposed dc-dc converter can be derived from the volt-second balance condition across the inductor L1 represented by (7). The current stresses of the inductor windings can be also determined as (6).The inductances of the power inductor L1 can be determined for their given peak-to-peak current ripples, ΆI1 Where ÃŽÂ » (%) is the ripple percentage of the inductor currents IL1 B. Buck Mode (Charging Mode) Operation Different from the traditional electric vehicle driving system, the fuel cell powered system needs an additional energy storage device to absorb the feedback power from the electric machine. This energy storage device may be a lead-acid battery as shown in Fig44 . The proposed circuit works in buck mode to recharge the battery from high-voltage dc bus. During this mode, the proposed converter is operated as an asymmetrical half bridge circuit with synchronous rectification current doubler to recharge the battery from high-voltage dc bus. The HVS switches Q5, Q8 and Q6, Q7 operate at asymmetrical duty ratios and 1- which require short and well-defined dead time between the conduction intervals. Referring to the equivalent circuits in Fig. , the detailed operating principle of this mode can be explained as follows. Fig44: modes of operation in buck mode While the LVS switches, Q1, Q4 and Q2, Q3, share unequal voltage and current stresses, the HVS switches, Q5, Q8 and Q6, Q7, share equal voltage stresses as (8). Then the current stresses of the HVS switches can be found as DESIGN CONSIDERATIONS FOR KEY COMPONENTS To verify the feasibility of the proposed scheme, a 2-kW laboratory prototype operated at 20 kHz was built. The simulation and experimental results will be shown and discussed in the next section. The LVS of the design example was connected to a 12-V lead-acid battery whose terminal voltage could swing from 10-15 V. The nominal voltage on the HVS dc bus was designed to 300 V, with an operating range from 150-400 V. The design considerations Based on (5), the turn-ratio selection of transformer can be calculated as (15). The HVS device ratings can then be calculated using (8)-(10) as follows: B. Power Inductors Let the peak-to-peak current ripples be 20% of the inductor currents under full power. The current rating and the inductance of the power inductor L1 can be determined using (6)- (7) as follows: Because of the ripple cancellation on the battery current, a larger ripple current in inductor L1 and can be allowed in practical applications. Thus, the inductance and the size of the inductors L1 might be smaller. To verify the theoretical operating principles, a 2-kW design example was simulated by using MATLAB. There is a good agreement between the simulation results and theoretical analysis. In this research, a 2-kW laboratory prototype was implemented and tested to evaluate the performance of the proposed bidirectional isolated dc-dc converter.. The ripple cancellation between two inductor currents can be observed. This is desirable for a low-voltage battery. 7.1 BOOST OPERATION FOR BIDIRECTIONAL DC-DC CONVERTER CONVENTIONAL CIRCUIT FOR BOOST MODE 7.3 RESULTANT WAVE FORM: 7.3.1 BOOST OPERATION Input and Output waveform: Fig 48 CONVENTIONAL CIRCUIT FOR BUCK MODE Fig47 7.4 RESULTANT WAVEFORM FOR BUCK OPERATION : Input and Output voltage waveform Fig 49 Proposed Bidirectional DC-DC converter Input and Output Voltage Waveforms: Fig50 Fig 51 Inductor Current Waveforms: Fig52 CONCLUSION A soft-switched isolated bidirectional dc-dc converter has been implemented in this paper. The operation, analysis, features and design consideration were illustrated. Simulation and experimental results for the 45W, 20 kHz prototype was shown as per principle. It is shown that ZVS in either direction of power flow is achieved with no lossy components involved As results, advantages of the new circuit including ZVS with full load range, decreased device count, high efficiency (measured more than 94% at rated power), and low cost as well as less control and accessory power needs, make the proposed converter very promising for medium power applications with high power density.

Friday, October 25, 2019

Essay --

Word Count: 1486 The Differences in Lucy Salyer’s and Cybelle Fox’s Criteria For Citizenship Throughout American history, the United States government created policies that decided who can and cannot come to America to be recognized as a full fledged citizen: an individual who has been recognized as a loyal member of a nation and receives benefits granted by the government. Lucy Salyer, author of Baptism By Fire, and Cybelle Fox, author of Three Worlds of Relief, emphasize that the government based their immigration policy on issues such as race and occupation. Despite their agreement that the United States government played a major role in deciding who can and cannot become full fledged citizens, Salyer and Fox disagree on the main criteria in which they decided which immigrants could have this recognition. Salyer argues that immigrants’ race and service decided whether they should be included or excluded from full citizenship, while Fox asserts that individuals’ occupation determined this matter. As Salyer and Fox both mentioned, the government played a vital role on deciding who can become citizens through legislation, organized groups, and judicial rulings. The government can be defined in this case as legislatures, agencies, and the justice system. Throughout American history, legislatures made laws in which included and excluded newcomers to America. Aristide Zolberg, author of A Nation by Design, emphasizes this by stating, â€Å"nationality involves the delineation of a boundary, denoting simultaneously inclusion and exclusion† (Zolberg,17). A country can tend to be welcoming or unwelcoming to foreigners. In the United States, legislatures have been inclusive and exclusive to foreigners depending on the national interest. Lu... .... 56% of workers were covered, while 67% of them were Europeans and 57% were white. According to Fox, Europeans benefitted the most since majority of them held manufacturing jobs and were more likely to turn sixty-five when it was grandfathered in. Yet, approximately 38% of Mexicans and blacks were covered. This was due to the majority of them being agricultural workers or domestic workers. Therefore, Europeans held occupations that allowed them to meet the criteria for social security benefits, while Mexicans and blacks did not (Fox, 251-253). Salyer and Fox agree that the government played a role in shaping immigration during the 1920s and 1930s. Yet, they disagree with the criteria that the government used to decide who received full-fledged citizenship. This debate still continues today and this nation continues to base a criteria on who to include and exclude.